{"id":1035,"date":"2019-03-03T15:41:21","date_gmt":"2019-03-03T20:41:21","guid":{"rendered":"http:\/\/brianpaonessa.com\/blog\/?p=1035"},"modified":"2019-03-03T17:45:56","modified_gmt":"2019-03-03T22:45:56","slug":"screwdriver-organization-racks-precision-and-standard-drivers","status":"publish","type":"post","link":"http:\/\/brianpaonessa.com\/blog\/screwdriver-organization-racks-precision-and-standard-drivers\/","title":{"rendered":"Screwdriver Organization Racks (Precision and Standard Drivers)"},"content":{"rendered":"

Back to the toolbox cleanup again.<\/p>\n

This time Screwdriver holders to keep them pesky rolling all over the place drivers inline.<\/p>\n

Originally I thought I would be using the modular wrench racks to hold the screwdrivers but Jess and I worked hard to get all the extra space out of them so the wrenches would fit snuggly and frankly the screwdrivers didn’t fit. We started with the ignition wrench holders and made some modifications for precision screwdrivers and just scaled up to build the standard driver sets.<\/p>\n

We ended up with a few designs to accommodate all the different sizes of screwdrivers. Since I wanted to keep like drivers together we once again made a modular design using magnets to keep them in place and hold onto the drivers.<\/p>\n

The precision screwdriver<\/strong> files consist of 3, 4-slot files (bottom width of 2mm, 3mm, 4mm) and 1, 6-slot file. All accept 12x12x2 disk magnets press it in place.<\/p>\n\n\t\t